Business Products & Services

How I Became An Expert on

The Importance of Colors of Underground Utility Lines

Underground utilities can easily be identified today. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. Although not completely eliminated, risks today have been reduced. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. You dont want something disastrous to occur. Fatal injuries can happen if underground utility lines are struck. Services in the area where the lines are located can experience interruption. People can call 811 to prevent these incidents, before they proceed with digging their property. When the number is called, you can let the utility companies come out and mark their respective lines.

Sometimes, even if the lines are marked accidents still happen. Utility lines are struck every 6 minutes, some place. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. With this machine, companies can easily locate utility lines. Companies can locate their utility lines if any property owner calls 811.

It is easier to identify underground utility lines today because they now use different colors for each utility. The colors below indicate the kind of utility uses it.

If you see white lines, then these are proposed excavation sites. It locates areas that will be excavated in the near future.

If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is perfect for electric works because it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Lines for potable water use blue lines. Reclaimed water, irrigation, and slurry lines used purple lines. Green lines are used for sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.

Suggested Article: useful source